Friday, November 29, 2019

Effect Of Blocking Cavities Experiment Essays - Industrial Design

Effect of Blocking Cavities Experiment Jared Matola Section 002 Team Members: Sam Liptak Matt Sudak Conducted: 2/10/99 Due: 2/17/99 Turned in: 2/17/99 at 8:00 Summary of Results: The purpose of this experiment was to demonstrate the effect that blocking cavities has in an injection mold on the process window and part quality. First we had to get a 95% full part. These parts were weighed before the hold pressure was added. The hold pressure was added and parts were weighed with the high, low, and optimum hold pressure. We also recorded the peak cavity pressure max, min, average, and standard deviation for the optimum parts. This procedure was repeated for the same mold with one blocked cavity. After calculating the cost per 1,000 part for each set up we determined that it costs $134.67 when all cavities are open, and $168.87 when one of the cavities are blocked. This is a 20% increase in the cost of 1,000 part when one cavity is blocked. When we blocked cavity #3 the average cavity pressure increased by11.47 psi. The parts had a slightly higher average weight when we blocked cavity #3. This difference was roughly .01g. When a balance of fill was calculated fo r the unblocked cavity setup. The order of fill was as follows: cavity 2 was first then cavities 4, 1, and 3. When cavity #3 was blocked, cavity 2 was first to fill followed by cavities 4 and 1. Apparatus: ? Battenfeld injection molding machine ? Flashlight mold ? Nylon cylinder (for blocking cavity) ? Process monitoring equipment ? Super glue ? Digital scale ? ABS material Method: See attached write up titled Effect of Blocking Cavities Experiment in appendix. The alterations made to this procedure were the fact that we eliminated blocking a second and third cavity due to time limitations. Results: 5.1 Cavities unblocked 250 parts * 54.45g/cycle * 1 lb/454g * $1.00/lb = $29.98 $50/hr * 30.15 sec/4 parts * 1hr/3600 sec * 1,000 parts = $104.69 Total Cost = $29.98 + $104.69 = $134.67 1-Cavity Blocked (Cavity # 3) 333.33 parts * 42.41g/cycle * 1 lb/454g * $1.00/lb = $31.14 $50/hr * 29.75 sec/3 parts * 1 hr/3600 sec * 1,000 parts = $137.73 Total Cost = $31.14 + $137.73 = $168.87 5.2 The average weight of each cavity is calculated on the data sheets 1 and 2 in the appendix of this report. 5.2 The balance of fill is located on the data sheet 3 in the appendix. 7.1 Our predictions were not returned to us and I do not remember what my predictions were. Therefore I cannot answer this question. 7.2 We were not told to calculate the cost per 1,000 parts with a 16-cavity mold in questions 5.1 to 5.3 therefore we do not have an exact number for this mold. We can speculate that the cost would obviously go down due to the production of 4 times as many parts per hour. 7.3 The cost of parts from a 4-cavity mold would be higher than those from a 16-cavity due to the fact that the 4-cavity mold would have a lower pressure drop and more plastic would be packed into the parts thus increasing the cost per part. The 4-cavity mold also produces less parts per hour and this will also increase cost when compared to a 16-cavity mold. The cost might also increase if there is a possibility for the parts to go out of specifications when a cavity is blocked. Appendix

Monday, November 25, 2019

Free Essays on Procrastination A Battle From Within

Taking pride in my work and making sure something is done to the best of my abilities are two things that I feel will take me very far in the things that I do in my work, and personal life, a along with my learning team. In my prospective of things a person’s attitude or characteristics are shown through the outcome of their projects or assignments. If someone doesn’t care enough to take their time to make sure something is flawless before turning it in, then to me, this tells me that they do not care about their own personal life to make sure their aren’t any problems, especially the ones that can be fixed in a matter of minutes. I don’t want to settle in life knowing something could have been ten times better if I would of taking five to ten minutes more to better the situation. Not only are you depriving yourself from the best possible outcome but you are hurting the one’s that are closely around you. If you are doing a mediocre job on a ta sk your spouse, at home, or a close colleague at work will be affected by this the same as you and this is not fair to them. The main area at work or at home that I need to work on is that of procrastination, the remitting of this paper says enough on this main problem in my life. I always put things off, my number one saying is, I will do that tomorrow, well tomorrow always seems to turn into, where the time went. This has forced me into a lot of pressurized situations that were not to enjoyable, just because I put something off until the next day, then the next, and so on until my boss is wondering where that research is that was due on his desk two days prior to the day he finally came and ask. However, I do feel that I do my best work when I am trying to beat a deadline, but then I have to deal with the fact that I do not have an adequate amount of time to go over my information before it is due. With this problem you fall back onto my first quality of taking pride in you... Free Essays on Procrastination A Battle From Within Free Essays on Procrastination A Battle From Within Taking pride in my work and making sure something is done to the best of my abilities are two things that I feel will take me very far in the things that I do in my work, and personal life, a along with my learning team. In my prospective of things a person’s attitude or characteristics are shown through the outcome of their projects or assignments. If someone doesn’t care enough to take their time to make sure something is flawless before turning it in, then to me, this tells me that they do not care about their own personal life to make sure their aren’t any problems, especially the ones that can be fixed in a matter of minutes. I don’t want to settle in life knowing something could have been ten times better if I would of taking five to ten minutes more to better the situation. Not only are you depriving yourself from the best possible outcome but you are hurting the one’s that are closely around you. If you are doing a mediocre job on a ta sk your spouse, at home, or a close colleague at work will be affected by this the same as you and this is not fair to them. The main area at work or at home that I need to work on is that of procrastination, the remitting of this paper says enough on this main problem in my life. I always put things off, my number one saying is, I will do that tomorrow, well tomorrow always seems to turn into, where the time went. This has forced me into a lot of pressurized situations that were not to enjoyable, just because I put something off until the next day, then the next, and so on until my boss is wondering where that research is that was due on his desk two days prior to the day he finally came and ask. However, I do feel that I do my best work when I am trying to beat a deadline, but then I have to deal with the fact that I do not have an adequate amount of time to go over my information before it is due. With this problem you fall back onto my first quality of taking pride in you...

Thursday, November 21, 2019

European Union Law Essay Example | Topics and Well Written Essays - 2000 words - 1

European Union Law - Essay Example Section 2(2) of the ECA enables such legislations to be enacted locally in the U.K. This is the enabling provision to repeal domestic laws inconsistent with EC law.3 The Directive comes into force once the set time limit has expired. If the Directive’s provisions are directly effective, an individual can invoke the provisions of the directive before a national court if the time limit has expired and accident occurred after the expiry of the time limit for transposition. The Commission may also bring action under article 258 of TFEU against the Member State. It can also bring an action against the Member State during the period of transposition or before the expiry of the set deadline if it finds that Member State has not taken national measures as in the present case, which can compromise the result envisaged by the Directive. In the case of Directives, they should be transposed within the time specified by the Commission failing which actions could be taken against the Govern ment in the national as well as European Courts. Infarction proceedings before the European Court of Justice can be initiated by the Commission as provided for under Article 226 of the EC Treaty. The Commission can also invoke article 228 in case a member State fails to rectify the lapse even after Article 226 proceedings, which can impose a lump sum fine on the State or an ongoing fine on a daily basis until the breach of law is corrected4. Recently, Ireland lost a case in the European Court of Justice in April 2013 for having failed to transpose the Article 8 of EU Directive 2008/94. In this case of No 398/11 Commission v Ireland, the court has stated at para 48 â€Å"Individuals harmed have a right to reparation against a Member State† if three conditions are fulfilled: There must be an infringement of EU law conferring certain rights to the citizens; the infringement must be serious; and direct causal link between the lapse and the damage to the individuals must be establ ished 5 Liability of the State arises from Article 4 (3) of TFEU which the national courts must ensure in the event of rights conferred by EU law on individuals being denied. To constitute a state liability, there must be a breach of EU law, attributable to the Member State and it must have caused damage to individual(s) as mentioned in the Francovich principle which arose out of Francovich case (1991)6 resulting from violation of the EU Directive which the Member State failed to transpose. Failure to implement can be total or partial. The Government is responsible for violation by different departments and also for the acts or omissions of public bodies who have been delegated with the responsibilities of performance. In Dillenkoffer and others v Federal Republic of Germany (1996)7, the failure to transpose within the time limit itself was held to be a serious violation. Thus, if an individual has interest safeguarded by the directive, state is held responsible for damages incurred by an individual caused directly as result of failure to transpose. This is especially relevant in cases of directives on health and safety at work, equal treatment of women etc.8

Wednesday, November 20, 2019

The Importance of Market Research Paper Example | Topics and Well Written Essays - 1000 words

The Importance of Market - Research Paper Example The focal company in this task is Verizon Wireless that in the telecommunications industry. There are different strategies that Verizon uses and I will analyze each one of them. One it deals with product research this it ensures that clients have different varieties to choose from and this is important as it ensures that clients have enough choice. This helps boost taste and preference of the employees and it is also important to note that in product research a lot of analyzes are done to ensure that the business can stand diversification (Austin, 2013). For a product to be set up to a final entity a lot has to be done and research and development come into place. This brings out the question that also marketing research is included for Verizon products. For example the new offer that will keep the telecommunications customers have to be influenced by conducting marketing research to identify the best suitable offer. It is not only the idea of choosing whether to use marketing research it is important but the best method of marketing research. It is important to ask whethe r to use survey, personal interview, observation and free trials. These are best regulated by the cost which they will incur and what is the best effective way. Verizon wireless cannot also ignore the importance of using advertising research. It is important to note that consumers need to receive information about a product and the company they are following closely as this will be important to further their agenda in progress and also help in receiving feedback. Verizon wireless been in the communication industry has to be up to date with any new changes and see to it they have adjusted this will ensure some new sanity to the firm and its client. The art of communication cannot be complete without the root to feedback as this is what ensures that what was accessed by the viewers was received by the targeted or focus group (Victoria,

Monday, November 18, 2019

Discuss the impact of Christian Fundamentalism on American polotics Essay

Discuss the impact of Christian Fundamentalism on American polotics - Essay Example They are to be engaged with one another not only within the bond of civility but, much more importantly, within the bonds of the love of Christ. The truth of the gospel transcends our disagreements about all lesser truths. And it is by that truth that we are knit together in mutual dependence and accountability. By that truth, the church is enabled to be a zone of truth in a world of impassioned mendacities--not the least of all in the world of impassioned political mendacities. There was a time when political involvement by conservative Christians was seen as a worldly or even sinful activity, now, political celibacy, if you will, is considered a dereliction of Christian responsibility. This mega-shift in perception has not been a recent phenomenon but evolved with time. During late 19th century until 1920s, the influence of conservatives collapsed. However, after 1950s, it revived miraculously due to contemporary political situation and worked its way up to reach a stage today that most of battles in the world are being portrayed as the ones with the evil, and there seems to be public support for many such aggressions which have almost divided this world into "with us or not with us". Religion is the most dangerous energy source known to humankind. ... The history, worldwide, of religion-fueled hate, killing, and oppression is staggering." - Eugene Peterson (from the introduction to the book of Amos in the Bible paraphrase The Message) Within the span of one generation, between the 1890s and the 1930s, the extraordinary influence of evangelicalism in the public sphere of American culture collapsed. Not only did the cultural opinion makers desert evangelicalism, even many leaders of major Protestant denominations attempted to tone down the offenses to modern sensibilities of a Bible filled with miracles and a gospel that proclaimed human salvation from eternal damnation only through Christ's atoning work on the cross. Therefore, making the connections between faith and politics in the late 1970s was quite novel at the time and controversial among conservative Protestants, especially fundamentalists. It is often argued that fear of religious conservative culture and not loss of socio-economic status led to political organisation of Protestant Christians during 1960s and later. Another reason for their organisation was they were not getting their due recognition in affairs of the state. Another section points out that political activism was spearheaded by the development of so called unethical and immoral cultures in the society. What stirred religious conservatives most was a sense that Supreme Court decisions were giving power to the opponents of traditional Christian values. The Court banned state sponsored prayer and Bible reading in the schools (Engel v. Vitale, 1962), legalized abortion (Roe v. Wade, 1973), and allowed for more government regulation in private Christian schools (Lemon v. Kurtzman, 1971). As a result, they became engaged in

Saturday, November 16, 2019

Benefits Of Technology Contribution To Developing Countries

Benefits Of Technology Contribution To Developing Countries In such fast growing economies, multinational companies are relying heavily on technology to maintain their competitive position in the global platform. To do so, multinational companies constantly expand into new markets and hence their success is partly determined by their ability to transfer technology to local companies (Chen (1996), Chung (2001)). Transfer of technology is a foremost strategy initiated by the multinational companies during their international expansion. Technology transfer is defined as the transmission of know-how to suit local environments, with effective absorption and diffusion both within and across countries (CHung (2001) and Tihanyi Roath (2002). Transfer of technology is not as simple as it looks it involves a series of complex procedures starting from the multinational companies capability of teaching, the local companies capacity of learning and the complex integration between the two companies (Griffith, Kiessling and Dabic, 2005). Technology gives c ompanies the competitive edge to strive and compete in the global world. It is integrated with every value adding activity of the company and helps in achieving these activities (Porter, 1980). Technology helps in improving and maintaining quality levels and competitive edge of the products. It also helps in reducing the productions cost and increase manufacturing productivity by improving efficiency (Gisselquist Grether, 2000). Every country (developing and developed) spends large amount of funds to attract foreign investments. This investment can be in terms of foreign direct investments in stocks of local companies or in terms of investing in the countrys properties real estate or opening up a manufacturing plant in the country. The reasons noted for such behavior by the governments of developing and developed country is to strengthen their economy and technology sophistication and upgradation. When a multinational company is operating in foreign (developing) country, it happens to brings in new technologies and ways of working to the local country. Thus helping the country to upgrade its technological know-how. In this paper, the author will first highlight the importance of technology contribution by multinationals and later evaluates the factors that will determine the whether or not the transferred technology provides benefits or is a disadvantage to the host country. The role of multinational companies as an agent of technology transfer for economic development of less developed countries is potential and very important (Bruce Peters, 1979). FOR MNCS: Keeping aside few instances that have taken place and the points noted against the multinational companies in less developing countries. We cannot ignore the fact that these multinational companies have played a vital role in technological and overall development of developing countries. Starting from transfer of technology to bringing new ways of managing business to improving productivity to making local business competitive in comparison to the world. The contribution of the multinational companies in less developed countries is noteworthy (Aswathappa, 2008). Multinational companies and developing countries have different goals, hence they should try to come together and find mutual goals and benefits. This could be in terms of resource identification, technology selection and advancement. It is known that the world is dependent on each other for few or more things. It is the developing countries that are dependent on multinational companies from developed countries for help in te rm of technological development and stronger economies. Similarly, the multinational companies are dependent on these developing countries for cheap labor and land. Their goal is mutual and hence by working together can realize benefits for each other. Against MNCS: There are many cases and instances which show that the multinationals technology contribution to developing countries is hardly suitable. Multinational companies develop technologies that are highly capital intensive whereas the technologies needed by the developing countries are labor intensive. Thus this makes the technology contribution as less suitable, also multinational companies charge heavily in the forms of fees, duties and royalties for the usage of their technology. Thus making the technology very expensive for the developing countries. On several occasions it has been noted that that multinational companies or foreign companies operating in developing countries are dumping technologies by using obsolete technology with the help of turnkey projects. It is also noted that multinational companies try to make local companies dependent on their technology and expertise and thus making revenues by contributing obsolete technologies. For example: Indian government did its best t o attract foreign companies and investment with a hope that these multinational companies would help reach its goal of having best technology around the globe and strong export hub. This goal of India is not yet been realized with the exports falling and the global financial crisis still showing some of its effect in India. Likewise, other developing countries have been disappointed at many occasions. Today the word green is associated with the global warming; many companies have gone green meaning they have taken the initiative to use eco friendly methods to minimize their impact on the environments. Developing countries attracted multinational companies with the hope of setting up Greenfield projects which would in turn help to maximize their manufacturing capacity. The goal is yet to be achieved. government of developing countries attract foreign companies in order to bring new technologies to country but these foreign companies in turn either acquire local companies or merge wi th them, thus keeping the country away from new technology and manufacturing abilities. Many less developed countries have now kept environment on their first priority. Countries are now becoming more concerned about the impact that multinationals create on the environment due to certain technologies that they use (Aswathappa, 2008). POTENTIAL FACTORS: It is also very important to note the factors that will determine whether the technology transferred will be of benefit to the developing country or not. Griffith et al., (2006) uses an environment strategy performance framework to identify the role of market (i.e. competitive intensity and market dynamics) and cultural environmental (national cultural distance and organizational cultural distance) factors on international technology transfer to developing countries. During a survey conducted to find out the direct efforts of market and cultural environmental factors on transfer of technology with 131 managers working in a subsidiary of multinational company. It was found that market dynamism factors were more influential market environmental factor than competitive intensity. Whereas national cultural distance was less influential cultural environment factor than organizational cultural distance. The report also highlighted a very important and pivotal relationship between transfe r of technology and subsidiary performance (Griffith et al., 2006) Summary Multinational companies are businesses that carry out operations across globe. They are the most active players in the world of international business they have been often charged on several grounds like taking advantage of poor countries, their interests override the interests of developing nations and they have a tendency to bribe the less developed country government to make policies and regulations favorable to them. It is widely known that each coin have two sides, there are pros and then there are cons, there is opportunity and then there is risk. multinational companies are very important in terms of technology contribution but then there are risks of obsolete technology, technology dumping, impact on environment etc. thus developing countryà ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬Ãƒ ¢Ã¢â‚¬Å¾Ã‚ ¢s government should list few factors that would help them to determine whether the technology contribution by multinationals is benefit to the host country or not. A research conducted by Gibson and Smilor suggests that there are four variables i.e. communication interactivity, cultural and geographical distance, technology equivocally and personal motivation play very important role in technology transfer within and between companies (Gibson and Smilor, 1991). In another research conducted by Rebentisch and Ferretti (1995), they found that four categories, Transfer Scope, Transfer Method, Knowledge Architecture, and Organizational Adaptive Ability, describe important elements of the transfer process. Transfer Scope describes the extent of embodied information being transferred. Transfer Method describes the approaches used to transfer the technology. Knowledge Architecture describes the structure and the interdependencies between the firms knowledge assets. Organizational Adaptive Ability describes an organizations ability to change its knowledge architecture over time.

Wednesday, November 13, 2019

The Unschooling Movement Essay -- Education, Growing Without Schooling

According to the National Center for Educational Statistics, last year almost 50 million American students enrolled into public school, with nearly 6 million attending private schools. A growing number forgo either of those, as over 2 million students were homeschooled. Lumped with the latter group, however, is an educational movement unlike traditional schooling at all – unschooling. Like any movement, way of thought, or lifestyle, how people define it varies greatly. It can be described as child-led learning, natural learning, and interest-led. In his newsletter Growing Without Schooling, John holt defined unschooling â€Å"as allowing children as much freedom to learn in the world as their parents can comfortably bear.† It’s a philosophy in which parents allow their children to live and learn in the way that works best for them, through day-to-day experiences and opportunities, without forced curriculum. The fundamental drive behind it is the thought that children are naturally curious about the world; they seek out activities and adventures that interest them and learn on their own. Children are given the freedom to spend their days in whatever ways excite them or give them pleasure, as well as something even more important. Their parents give them their trust in allowing them to pursue their own interest; they get trust in the assurance they will learn the things they need to know, when they need to know them. This, of course, brings up one of the major criticisms of unschooling. It’s argued that children, being young and inexperienced, aren’t intelligent or wise enough to know what knowledge will be necessary later on in life. Only skilled educators and administrators should decide what needs to be learned and by what age.... ...t, economics, etc. Even discounting channels like Discovery, television can be a wealth of information. Exploring the creek at the end of the street can be a valuable lesson in science and biological ecosystems. Parents and their willingness to involve their children in the world around them are what make the difference between educational and uneducational. John Holy, regarded as the father of unschooling, wrote in his book How Children Fail, It is as true now as it was then that no matter what tests show, very little of what is taught in school is learned, very little of what is learned is remembered, and very little of what is remembered is used. The things we learn, remember, and use are the things we seek out or meet in the daily, serious, nonschool parts of our lives. Works Cited Holt, John. How Children Fail. New York; Pitman Publishing Company, 1964.

Monday, November 11, 2019

Comparative advantages and disadvantages of cone crusher

Cone Crusher is widely used range, high efficiency crusher, cone crusher according to the scope of use, crushed into coarse, medium and fine crushing three pieces on the current situation of China crushed ore concentrator plant of view, broken equipment powered by the standard type cone crusher, crushing equipment uses a short head type cone crusher, has almost finalized. However, Instead of using crushing equipment cone crusher, Jaw crusher Is to use.For proper selection and rational use of coarse crushing did not prepare, now they are briefly analyzed and compared as allows. Cone Crusher (compared with the Jaw crusher) mall advantages: 1, crushing chamber depth, continuous operation, high production capacity, low power consumption unit. Compared with the same width to the mine mouth Jaw crusher, the production capacity is higher than the latter more than doubled, while electricity consumption per ton of ore is 0. -1. 2 times lower than the jaw; 2, work is relatively stable, vibrati on lighter, smaller basis weight of the machine equipment. Cone crusher weight basis, usually 2-3 times the weight of machinery and equipment, and Asia weight jaw crusher machine was 5-10 times its own weight; quarry equipment http://www. Quarry-equipment. Com/ quarry plant http:www. Quarry-equipment. Com/products/j-jaw-crusher. HTML In building energy, transportation energy saving promising.Greenhouse gases existing 50 billion square meters of urban and rural construction, building energy emissions accounted for one-third of the greenhouse gas emissions, while the city has air- conditioning system energy consumption accounted for 50% of total energy consumption of the building. If you can start the â€Å"zero emissions† building projects in mom more developed cities in the country, this market will be very large.Currently, hybrid vehicles, electric vehicles, fuel cell vehicles and other research and development work in continuing to promote our country may be the first break through in terms of hybrid cars. Although we still lags behind in terms of battery, charging system, energy conversion metering control system, but it also gave birth to a huge opportunity. Stone crusher http://www. Stonecutter. Org/ stone crushers http://WV. Stonecutter. Org/Grammaticalness/Jaw-Crusher. HTML Comparative advantages and disadvantages f cone crusher and jaw crusher By wayfaring type cone crusher, has almost finalized.However, instead of using crushing equipment cone crusher, Jaw crusher is to use. For proper selection and rational use follows. Cone Crusher (compared with the Jaw crusher) main advantages: 1, consumption per ton of ore is 0. 5-1. 2 times lower than the Jaw; 2, work is relatively basic weight Jaw crusher machine was 5-10 times its own weight; quarry equipment quarry plant http://www. Quarry-equipment. Com/products/]c-]awe-crusher. HTML In stone crushers http://www. Stonecutter. Org/Gerrymandering/Jaw-Crusher. HTML

Friday, November 8, 2019

Gerald Millers Processes of Persuasion as Evidenced in Real Life essays

Gerald Millers Processes of Persuasion as Evidenced in Real Life essays In Gerald Millers On Being Persuaded he talks about the definition of being persuaded. He talks about how persuasion is coercive, and how a lot of times coercive acts are usually followed after all the persuading. Coercive acts are acts that are military force, the use of guns, any economic sanctions, or any force that could be used to threatened a persons social or well being. In this paper I will be trying to compare the different techniques and assertions used in Gerald Millers On Being Persuaded to my own experience dealing with the idea of homosexuality. Out of the three techniques I will only be talking about two, and that will be response-changing. This is the process that helps reinforce convictions and the other is the changing process which is like the attitude change. In an earlier paper that I had to write I had to write about what big thing in my life that I had to change my mind or opinion about. In that paper I wrote about my views on homosexuality. I did not agree with homosexuality in any shape, size, or form. In fact I was even a little homophobic. But this all changed when I found out that one of my good friends turned out to be a homosexual. I guess in a sense I had to be persuaded into liking this fact, or actually persuade my mind into accepting the fact that one of my friends was gay. In a way I think had to deal with the whole social part of befriending someone who was a homosexual. In my head I had two sides that were forming. One was should I befriend the gay person and lose respect from those who looked down on it as something negative, or even have people think that I myself is gay just because I am friends with a gay person and hang around them. But still have a cool guy who had my back in situations or always helped me out when I needed him. Or should I ignore my friend who I knew for a good bit and try to appease those who I knew would look dow...

Wednesday, November 6, 2019

How to Get Any Job You Want with these 7 Resume Hacks

How to Get Any Job You Want with these 7 Resume Hacks The robots are real! They’re here, and they’re coming for your†¦ resume. More and more companies are turning to digital screening processes and online tools to get through the many, many applications they get for open positions. It makes a ton of sense that our approach to resumes and job applications should change, now that the formats and gatekeepers are shifting. You can follow these top resume tips for 2016 to help you get ready to compete with other fifty applicants.Imgur user Stephane Grace has hit on a method for revamping your resume to fit this new digital job hunt, and although his techniques may not work for everyone in every industry, his writeup has a number of great common-sense tips.Here are 7 Steps to â€Å"Hack†Ã‚  the Automated Resume Screeners and Get You Those Job InterviewsYour goal is to get past the robot gatekeepers, and get your (digital) self in front of the human reviewers who take it from there. This thinking takes basic search en gine optimization (SEO) principles and applies it in a more personal way.Step 1: Research and collect data.Start by collecting online job descriptions for the kind of job you’re seeking, and copy them into a master document. While you’re collecting, keep an eye out for common themes and keywords.Step 2: Play job description bingo.Do a more comprehensive review for repeating words and phrases as part of the job descriptions. You can do this review with your own eagle eyes, or you can use free online tools that flag words and phrases by frequency. (Grace recommends SEOBook.)Priority resume keywords: words used in the company’s listed job title, used in the description headlines, used more than twice, called out as success criteriaSecondary resume keywords: mention of competitor companies or brand name experience, keyword phrases (phrases surrounding priority keywords), notable industry qualifications (training, associations)Step 3: Find out how your experience fit s in.Look at your existing resume and your professional experience. Can you make those match  with the keywords and themes you uncovered in Step 2? Make sure to wring every bit of potential out of your hard and soft skills.For example, if a job you want calls for a particular kind of coding experience, but you’ve only taken classes in it (as opposed to hands-on work experience), make sure it’s still noted in the initial resume with terms like â€Å"experience with† or â€Å"exposure to.†Step 4: Boost your skills.If your research up to this point has uncovered some gaps that could prevent you from getting the job you want, start filling in those gaps. Sign up for a class. Do extensive research online. Find a way to get that skill from the â€Å"should have† column to the â€Å"got it!† column.Step 5: Write it all out.Grace’s main argument is that most resumes submitted online are seen by automated eyes only in the first round. Thus, he argues, you can throw out all the conventional wisdom about how short your resume should be, for easy reading, since you’re really just trying to appeal to a word-seeking system.As an editor and someone with an attention span handcrafted by television and the internet, I still think you should be as concise as possible- but the old-school resume limitations are certainly up for debate in this digital age.Step 6: Post it online.Send off your rejiggered resume to the digital winds, posting it on job boards or online application systems.Step 7: Follow up with a more conventional resume.Once you start getting bites, respond with more traditional job application elements. For example, if someone from HR reaches out to you to follow up, attach the shorter-and-sweeter version of your resume (the 1-2 page one you typically use), and include your cover letter pitch if necessary.If you try these methods for your next round of job searching, it’s best to confirm some informati on up front: like that you’re not sending your extra-double-comprehensive resume straight to a human’s email inbox, but rather a generic system. The last thing you want is a â€Å"tl;dr† blow-off if your SEO masterpiece is overwhelming and doesn’t pass through an automated system at all. But if you do want to try to bump up your initial approach and try to get those robots to do your (professional) bidding, you could be that much closer to landing the job you want. [image source: resunate]

Monday, November 4, 2019

History of Art and Technology Essay Example | Topics and Well Written Essays - 2500 words

History of Art and Technology - Essay Example Ideas that come from it are formulated by one’s reaction to the changing of sceneries as the vehicle moves from one point to another. This experience can only be felt by the person being transported, by the passenger. For one who sees a vehicle passing by, the vehicle itself is nothing but a mobile speck in seemingly still scenery. For the cargo forwarder or the airline staff, whose job is to ensure the delivery of things and people to another location, the vehicle is a means for completing a service or a business process. Therefore, their impression of the vehicle is nothing more but practical and mechanical. The philosophers and the more introspective artists have a higher degree of appreciation with a vehicle ride. For the philosophizing passenger, who seats by window of a vehicle and watches the changes of the scenery outside happening in rapid succession, a vehicle provides him something more than just a travel through space and time. As he absorbs the sight in his mind, he also transports himself from the real sensible world to one that is fictitious or surreal. What he sees are real but the quickness of the changes does not allow him to grasp fully its reality. With portions after portions only of what is real absorbed in his mind, it becomes convenient for him to create his own imaginary world. This paper provides a description and analyses of what the airline passenger or experiences as he takes a flight from an airport to another. This experience is presented in the form of an analogy to the airplane’s ten-point manual. Each point of the manual shall be the basis of the description for what the passenger notices and absorbs as he is transported. An airplane provides the passenger the sensations of being in â€Å"a relatively inert body traversing the world at high speed.† (Morse 109) This mode of transportation, however, is often the preference of

Saturday, November 2, 2019

An Ethical Leader's Response paper Essay Example | Topics and Well Written Essays - 1250 words

An Ethical Leader's Response paper - Essay Example The Utilitarian Approach was pioneered by Jeremy Bentham and John Stuart Mill in the 19th century, according to their approach ethical decisions are the ones that provided the greatest balance of good over evil. Following this approach, individuals or specifically managers or leaders at work goes step by step; they first organize their thoughts by making out the different courses of actions that are available to them and then raise questions themselves about which actions or alternatives selected will result in the greatest good and the least negative consequences to the parties at stake. The ethical action is one that provides the greatest good for the greatest number1. The Rights Approach; Immanuel Kant proposed this approach and suggested that people are free to do as they wish; it tells about their right to choose for themselves and not being forced by others in direction which is against their wishes and if this happens it will be a clear cut violation of the human dignity. Some of these basic rights include the right to privacy, truth, the right not to agree, the right of not being injured etc. When making decision using this approach managers or leaders should ask them whether anyone's rights are being hurt to make sure that rights of all are respected. The Fairness or the Justice Approach was initiated by the famous Greek philosopher Aristotle. This use of this approach makes sure that decisions made are not discriminatory or biased in any way. In fact, the question is whether they treat every one equally. The favoritism and discrimination are seen as unjust and thus any decision taken on such grounds are not at all justifiable. The Common Good Approach unlike the rights approach looks for the benefit for the society or the community as a whole; from this approach emerges the concept of institutions and policies that favor the society as a whole rather than individuals in particular. The Virtue Approach leads to creations of ideals and role models who should be followed. These ideals represent the people we want to become. Virtues are the characteristics of a personality that leads one to act or behave in a certain manner. An individual when making decision though is affected by the approach he follows, but there are certain factors that influence the decision making; these factors include individual differences, situational factors and lastly the issue related factors2. Personal factors influence one's ability to make judgments and also differs in respect to how much a person is sensitive to a particular issue at hand. One's cognitive moral development affects the personal factors; it depends on which stage of moral development a person is in. There are three stages of cognitive moral development- the pre conventional, conventional and the principled level. At the pre-conventional level, which is the lowest level an individual is affected most by the societal responses that the decision will foresee, the degree of ethical involvement is determined by the desire to avoid the punishment or to receive any reward. At the intermediate level that is the conventional level, the concern for society is increas ed and decisions are made on the basis how they will affect others. At the last, the principled level, a person has already developed strong moral and ethical standards that have been shaped over the years and then selects from the approaches that we